Ultra and Ultra Wide SCSI to IDE & UDMA Bridge Adapters & Applications
Now Accepts UDMA/100/133, 160GB Drives
Convert any IDE/UDMA/ATA 40-pin device to USCSI-II & III 50-pin & UWSCSI 68-pin devices so that it is seen as a SCSI device (Hard drive, CD, Scanner, Tape Drive, etc..) by your SCSI adapter or SCSI RAID Controller.
These adapters can provide your existing SCSI Systems (Mac, SUN, PC) with the capability to use low costs IDE devices without sacrificing your SCSI speed and configuration.
Model |
SCSI-to-IDE Bridge Adapters |
USCSI-IDEBR2 |
USCSI 20mb/s to IDE Bridge Adapter. Mounts behind CD or HDD |
UWSCSI-IDEBR3 |
UWSCSI 40mb/s to IDE Bridge Adapter. Mounts behind CD or HDD |
UWSCSI-IDE3.5" |
UWSCSI 40mb/s to IDE 3.5" Hard Drive Mounting Tray |
USCSIDE-BR2 (20mb/s) 50pins-to-40pins for CDs and 50pins HDD
Accepts UDMA/100/133, 160GB Drives
UWSCSIDE-BR3 (40mb/s) 68pins-to-40pins for 68pins ROM devices and HDD
Accepts UDMA/100/133, 160GB Drives
Example: You can convert any IDE/ATA/UDMA 40-pin device such as Hard drive, CD-Rom and CD-RWR to USCSI 50-pin & UWSCSI 68-pin Hard Drive. See the Mobile Rack below
Use the 3.5" adapter drive tray below to convert and IDE drive to an SCSI drive for attaching to your existing SCSI chain for faster and more stable data transfer for up to 40mb/s
UWSCSIDE-3.5", 40mb/s, 68pins UWSCSI-to-39pin UDMA/66/100
Accepts UDMA/100/133, 160GB Drives
Features:
|
A general purpose SCSI-to-IDE device converter |
|
Higher system I/O performance |
|
Creates new SCSI devices in economic cost |
Specifications:
|
USCSI/20mb/s 50pins and UWSCSI/40mb/s 68pins interface |
|
Supports UDMA/33/66/100/133 hard drives |
|
Selectable SCS ID from 0 to 15 |