Compact, Powerful, Flexible, Portable and Affordable
with Industrial grade system board and 94% chipset utilization
Models |
SyneAcco-Mini-RAID1 Server |
SyneAcco-800RBK |
SyneAcco-MiniRAID1 Server: w/800Mhz VIA Eden C3 processor 100/133FSB, 3xRLT8139C NIC , VGA VIA Apollo PLE133 Graphics Controller, 128MB PC-133 SDRAM, 2xUSB, 1xDB25 LPT1, 1xDB9 Com2 port, PS/2 KB+ Mouse, 1x32bit PCI Slot, ARAID99-1000L for up to 300GB with UDMA/100 disk interface, Slim CDx24+Floppy 1.44 |
SyneAcco-800IBK |
SyneAcco-MiniRAID1 Server: w/800Mhz VIA Eden C3 processor 100/133FSB, 3x Intel® 82559 NIC , VGA VIA Apollo PLE133 Graphics Controller, 128MB PC-133 SDRAM, 2xUSB, 1xDB25 LPT1, 1xDB9 Com2 port, PS/2 KB+ Mouse, 1x32bit PCI Slot, ARAID99-1000L for up to 300GB with UDMA/100 disk interface, Slim CDx24+Floppy 1.44 |
SyneAcco-1000RBK |
SyneAcco-MiniRAID1 Server: w/1GHZ VIA Eden C3 processor 100/133FSB, 3xRLT8139C NIC , VGA VIA Apollo PLE133 Graphics Controller, 128MB PC-133 SDRAM, 2xUSB, 1xDB25 LPT1, 1xDB9 Com2 port, PS/2 KB+ Mouse, 1x32bit PCI Slot, ARAID99-1000L for up to 300GB with UDMA/100 disk interface, Slim CDx24+Floppy 1.44 |
SyneAcco-1000IBK |
SyneAcco-MiniRAID1 Server: w/1GHZ VIA Eden C3 processor 100/133FSB, 3x Intel® 82559 NIC , VGA VIA Apollo PLE133 Graphics Controller, 128MB PC-133 SDRAM, 2xUSB, 1xDB25 LPT1, 1xDB9 Com2 port, PS/2 KB+ Mouse, 1x32bit PCI Slot, ARAID99-1000L for up to 300GB with UDMA/100 disk interface, Slim CDx24+Floppy 1.44 |
Please ask for changes, upgrades and accessories
Memory upgrade to 512MB SDRAM PC-133 16 chips module: For higher performance and better caching for NAS, Print server and Web Appliance applications. |
SCSI on board (Adaptec), or low profile LSI Logic SyneSCA-U3LP or SyneSCA-U4LP : For external data storage, tape backup, scanner or any other external SCSI device. |
Up to 512MB DOM (Disk on Module): For pre-installed secure OS that can provide pre-configured OS onboard restricting direct user interface preventing accidental change in devices such as NAS, Web Appliance servers, Forensic Data Collection equipment and etc.. |
High memory low profile PCI VGA adapter for higher display resolution: For high colour graphics, mapping and multimedia applications. |
OEM units with different configurations: Units can be sold without ARAID99 and with other RAID units like our SyneRAID-300i , CD-RWR/DVD or IDE/SCSI drive caddies like Drive-Caddy-912 or Drive-Caddy-911 |
Introduction:
SyneAcco Mini-RAID Server is first of its kind made from top quality materials and assembled on a state-of-art industrial fully hardware based system board offering unprecedented embedded high performance and advance features and stability for the size and the price. |
SyneAcco Mini-RAID Server has all the laptop features plus more advanced and powerful computing capability. It is an ideal solution for those who are looking for a serious, compact and multi-featured computer yet affordable. |
SyneAcco Mini-RAID Server offers great security options for the individuals and offers the opportunity to get carried off the site in whole or partially in case of urgent departure and emergency situation like fire, explosion or any natural disasters like earthquake and etc. Users can simply pick up the unit or only the data trays and walk away to safety. The removable drive trays can be taken out and locked away at night and during the office close time, or can be taken off site by the users for protection. |
SyneAcco offers realistic practical solutions for computing applications such as:
Compact Desktop Workstation: Anyone can use the unit like standard desktop PC only with more features, capabilities, reliabilities, portability, mobility and flexibility. |
Multiple Operating Systems Installation: Users can obtain additional drive trays and install different OS for testing on different drives for different applications. This eliminates the need of having multiple units running different OS. This also offers a great way to benchmark and do compatibility tests for different software or external devices with different OS with the same hardware. |
Forensic Analysis and Computing: Due to it's powerful performance and mobility, it can be used by forensic specialists to retrieve data form the suspect's computer using different media and interface such as ; SCSI, IDE, USB, Firewire and even through three independent network connections. SyneAcco IDE RAID1 mirroring technology writes and duplicates the forensic data into two separate drives creating unquestionable identical drive and copies from the suspect computer. These drive then can be given to each party for assessment without one party compromising the integrity of the obtained data.
|
Remote Network Management: It can be configured to manage multi-platform networks with different protocol such as; Apple Share (AFP), Internet (HTTP 1.1), Microsoft Networks (CIFS/SMB), Novell NetWare (NCP), UNIX (NFS v.3) and etc. |
NAS and Backup Server: The unit has proven to be a great tool to offer NAS (Network Attached Storage) for data storage management for up to 6TB with more than 100 users simultaneous access to data storage units. It also can be configure to act as a distributed backup server solution. |
Technical Specifications:
System Architecture:
| Main board with standard 5.25" form factor |
| Onboard VIA Eden C3 Processor EBGA Package with 128KB Level 1 and 64KB Level 2 Cache |
| FSB 100/133MHz |
| PCI V2.2 compliant |
Processor & Chip Set:
| CPU onboard 800MHz or 1GHZ with 100/133FSB |
| VIA 8601A 100/133MHz North Bridge |
| VIA VT82C686B PSIPC PCI SUPER-I/O Integrated peripheral controller |
| PCI V2.2 compliant |
Memory:
| One 168-pin DIMM, Support Max memory size to 512MB |
BIOS:
| ward® System BIOS |
| Advanced Power Management support |
| 4M bits flash ROM |
On Board LAN:
| 3 x Intel® 82559 LAN 10/100 Ethernet Controller, or 3 x RLT8139C |
| 10/100 Base TX support, full duplex |
| Boot From LAN function |
| Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware, SCO Open Server 5.0, Linux, FreeBSD |
| RJ45 with LED connector x3 |
On Chip VGA:
| VIA Apollo PLE133 Graphics Controller |
| 64-bit Single Cycle 2D/3D Graphics Engine |
| Supports 2 to 8 Mbytes of Frame Buffer |
| Real Time DVD MPEG-2 and AC-3 playback |
| Integrated 24-bit 230MHz true color DAC extended screen resolutions up to 1600 x 1200 |
| Allows external TMDS transmitter (DVI) for advanced panel interfaces |
| 15-pin D-Sub VGA Output; 50-pin connector x 1; Optional TMDS Module |
On Board Solid State Disk Socket:
On board reserved socket for DOC of M-systems: 2MB~288MB, etc |
On Chip and On Board I/O:
| On Chip VT82C686B INTEGRATED Super I/O: |
| SIO x2, with 2x16C550 UARTs, 10 pin header x1, D-Sub x1 |
| PIO x1, bi-directional, EPP/ECP support, 26 pin connector x1 |
| Floppy Disk controller: 34 pin connector x1 |
| Support UltraDMA-33/66/100 IDE with 40 pin connector x1, 44Pin connector x1 |
| Optional Compact Flash Module support |
| Optional Disk On Module on the 44pin IDE Connector to support DOM |
| 6 pin mini DIN connector x1, for PS/2 keyboard/mouse |
| On board USB port x2 |
| On Board buzzer x1 |
| GPIO (4 in 4 out) |
| On board 2 pin header for I 2 C |
| On board 5 pin header for IrDA |
| On Board 2 pin header for reset SW / 2 pin power SW |
| AC97 interface for optional audio module |
Real Time Clocker:
| On chip RTC with battery back up |
| External Li Battery x1 |
Watchdog Timer:
| Watchdog timeout can be programmable by Software |
On Board Bus Expansion:
| Proprietary Embedded PCI Connector |
| Standard PCI Slot |
Physical Characteristics:
| 183mm(W) x 310mm(D) X 178mm(H) |
| Net Weight 7.01Kg ~15.5LB |
| Colour Black ( Beige OEM Special Order ) |
System Monitor:
| Derived from Super IO to support system monitor |
| 5 voltage (For +3.3V, +5V, +12V, Vcore and Vtt) |
| Two Fan speed (For CPU and Chassis) |
| Two temperature |
| Drivers support: Windows® 95/98/2000, Windows® NT4.0 |
Power Source & Power Requirements:
| 200W PSU |
| 6 PIN Power Input Connector: |
| PIN Define | Voltage | Power Requirement |
| PIN 1 | +5V | 6A |
| PIN 2 | +5V | |
| PIN 3 | GND | - |
| PIN 4 | GND | - |
| PIN 5 | GND | - |
| PIN 6 | +12V | 200mA |
Accessory Power Converter Cable
| Two 4P to 6P (For AT Power Supply) |
| ATX Power Connector to 6P+ 2 Pin Power SW (For ATX Power Supply) |
| Optional Power Module to support NoteBook Type Power Adapter (16Vdc~24Vdc input) |
Environments:
| Operating temperatures: 0°C to 60°C |
| Storage temperatures: -20°C to 80°C |
| Relative humidity: 10% to 90% (Non-condensing) |
Certification:
| CE approval |
| FCC Class A |
