SyneRAID6™-SATA series are standard 19" Rackmount 8/12/16-Bay SCSI/Fibre-to-SATA disk array RAID subsystems with low profile, ultra condensed, totally modular and cable-less design with various data storage applications for fast-growing SAN and NAS environments. These units offer incredible cost-effective data storage solution for the clients ranging from small business to departmental and enterprise level.
SyneRAID6™-SATA series are high performance, incredibility reliable, considerably available with scalability to greater capacity in a cost-effective manner. They utilize the new generation of Serial ATA 1.0 channels for disk drives and offer two different types of host interface, Ultra320 SCSI or 2Gbps Fibre Channel as DAS (Direct Attached Storage).
When properly configured and implemented, they can provide non-stop data access with a high degree level of fault-tolerance utilizing RAID technology and advanced array management features.
SyneRAID6™-SATA series offer 8/12/16 SATA drives bay with two Ultra320 SCSI host interface, in 2U or 3U height 19" Rackmount chassis. The RAID controller is equipped with a high performance Intel IOP80321 Xscale processor along with intelligent cache system supporting up to 1GB DDR ECC memory. These units benefit from the advance algorithms to provide RAID level 0, 1,3, 5 and RAID6 to provide higher degree of data protection, parity redundancy and consequently higher availability.
SyneRAID6™-SATA series can offer a performance up to 150 MB/sec with utilization of new generation of Serial ATA drives. Terabytes of data bank can be built with less compatibility problems. With redundant and hot-swappable power supplies and cooling system, components failure do not effect and interrupt the data access services and availability.
SyneRAID6™-SATA series also offer Web-base GUI embedded management and configurations utilities via on-board Ethernet port providing a convenient way to configure and monitor the RAID subsystem locally and remotely. The SNMP feature also create additional alerting in larger network through local LAN or over IP.
Summery of Technical Specifications |
|||
RAID Architecture |
|||
Intel IOP80321 Xscale 64-bit I/O processor |
|||
Proprietary ASIC to support extreme performance RAID6 function. |
|||
Up to 1GB 200MHz DDR SDRAM on one DIMM socket with ECC |
|||
Advance 100Mhz/64-bit PCI-X bus architecture. |
|||
Marvell 8 channels SATA controller (88SX5080) |
|||
RAID Features: |
|||
RAID Levels: 0, 1, 3, 5, 0+1, RAID6 & JBOD |
|||
Multiple Array selection |
|||
Online RAID level/stripe size migration |
|||
Online Array Roaming (mix match drives in any order) |
|||
Online capacity expansion and RAID level migration simultaneously |
|||
Instant availability and background initialization and Snap-Shot |
|||
Automatic drive insertion / removal detection and rebuilding |
|||
Host Interface: |
|||
|
|||
Drive Interface: |
|||
8 or 12 or 16 SATA drives 1.0 channel -1.5Gbps per channel |
|||
Monitoring & Indicators : |
|||
LCD Control Panel for setup, alarm mute and configuration |
|||
System status indication through LCD, LED and alarm buzzer |
|||
All system events can be sent to multiple user alerts to be via "Plain English" e-mails. |
|||
SNMP alerting and event report systems compatible with most of SNMP management systems |
|||
RAID Management: |
|||
Field-upgradeable firmware in flash ROM. |
|||
Firmware-embedded SMTP manager ?Monitor all system events and user can select either single or multiple user alerts to be sent via "Plain English" e-mails. |
|||
Firmware-embedded Web Browser-based RAID manager via 10/100 Ethernet port |
|||
Operating Systems: |
|||
Hardware and OS independent, transparent to the host, tested with most popular OS such as; MS-Windows all versions, Linux all versions, Sun Solaris 8/9, as well as Novell Netware, FreeBSD, Unix different versions. |
|||
Environmental /Physical |
|||
Cooling System: |
Hot swappable and Redundant Cooling Fan modules. |
||
Power System: |
Redundant by Dual 460W Power modules with PFC feature, Load Sharing type and cable less design. |
||
Battery Backup (Optional) : |
Moduler battery backup for cache buffer and controller protection |
||
Electrical: |
AC Voltage 110-230 VAC /AC Frequency 50-60Hz |
||
Temperature: |
Operating Temperature: 10 to 35 degree C. |
||
Relative Humidity: |
20% to 80% non-condensing |
||
Dimensions: |
446mm(W) x 470mm(D) x 3U |
||
Weight: |
18KGS |
||