The First 12-Drive 2U Rackmount SCSI-to-IDE/SATA RAID Subsystem Least Space, Highest Capacity, Cableless Design with Dual Independent Intelligent Redundant Power Supply |
|---|
A Few Highlights:
Intel IOP80321 400MHZ Processor with up to 1GB ECC Cache |
|
U3WSCSI/160MBs or U4WSCSI/320MBs Dual Channel Clustering Host Interface |
|
12 x UDMA/133 or SATA/150 Hot-Swappable Drives |
|
Dual Parity RAID6 for dual drive failure and addit i onal data integrity protection |
|
HDTV video recording/editing for its performance (Entertainment and Broadcasting industry focused) |
|
Suitable NAS storage body & On-line & Near-line backup devices |
|
High capacity, cost-effective, optimized-performance |
|
User Friendly Interface through GUI Software, Direct IP Connection or RS-232 Serial Port |
|
Allow unplug a non-defective Drive |
|
Full Fault Tolerance: Self Healing |
|
On-line Raid set moveable |
|
Smart LED display–SALP (System-Active LED Plus) & LED Auto-Scanning |
|
Overload voltage protection |
|
Smart monitor- LEDC Modularized |
|
Unique Back-Plane Easy Plug In-n-Out |
|
Intelligent Environment Detection Control Design |
|
Excellent ventilation and vibration-proof design |
|
No need extra cable to connect Power supply and Controller (Convenient sliding rail design) |
Specifications |
SCSI-to-IDE SyneRAID6-12SCIDE |
 SyneRAID6-12SCSAT-1 |
|
|---|---|---|---|
RAID Engine |
Intel IOP80321 Processor |
Intel IOP80321 Processor |
Intel IOP80321 Processor (64 bit/400MHz) |
Online RAID Levels |
0, 1, 3, 5, 6 & 0+1, JBOD, |
0, 1, 3, 5, 6 & 0+1, JBOD, |
0, 1, 3, 5, 6 & 0+1, JBOD, NRAID |
Multiple RAID Support |
16 Array workgroup |
16 Array workgroup |
16 Array workgroup |
Cache Support Size |
Up to 1GB ECC DDR SDRAM |
Up to 1GB ECC DDR SDRAM |
Up to 1GB ECC DDR SDRAM |
Cache Memory Type |
DIMM 184 pin Socket |
DIMM 184 pin Socket |
DIMM 184 pin Socket |
Host Channels |
2 |
2 |
2 |
Number of drive bay |
12 |
12 |
12 |
Host Interface |
U3WSCSI/160MBs |
U3WSCSI/160MBs |
U4WSCSI/320MBs |
Disk Bus Interface |
UDMA/133 |
SATA/150 |
SATA/150 |
PCI IDE Controller |
64bits / 66MHz |
64bits / 66MHz |
64bits / 66MHz |
LED Indicators |
RAID Busy, Power Supply, |
RAID Busy, Power Supply, |
RAID Busy, Power Supply, Fan, Temperature |
Environment Detection |
FAN, Temperature, Voltage |
FAN, Temperature, Voltage |
FAN, Temperature, Voltage |
Mobile Rack LED Indicators |
Power, Drive Status |
Power, Drive Status |
Power, Drive Status |
Firmware Upgrade |
VT-100 & Web Browser |
VT-100 & Web Browser |
VT-100 & Web Browser |
E-mail Alarm (No need install any software) |
Yes |
Yes (Support all the OS base) |
Yes (Support all the OS base) |
Remote TCP/IP Configuration and Management |
Yes |
Yes (Ethernet Port) SNMP Trap |
Yes (Ethernet Port) SNMP Trap |
Rack-mount Size |
88(H) x 483(W) x 486(D) mm |
88(H) x 483(W) x 486(D) mm |
88(H) x 483(W) x 486(D) mm |
Hot Swap Power Supply Rating |
400W (1+1) PFC |
400W (1+1) PFC |
400W (1+1) PFC |
Input Voltage |
AC 90 ~ 260V |
AC 90 ~ 260V |
AC 90 ~ 260V |
Operating Temperature |
5° to 55° |
5° to 55° |
5° to 55° |
Weight Packaged |
22Kgs ~ 48LB (W/O.H.D.) |
22Kgs ~ 48LB (W/O.H.D.) |
22Kgs ~ 48LB (W/O.H.D.) |
Includes: |
- 1 x 128MB Cache RAM |
- 1 x 128MB Cache RAM - 1 x 3ft SCSI Cable - 1 x 6ft Null Modem Cable - 1 x LVD/SE Terminator - GUI RAID Software - User Manual |
- 1 x 128MB Cache RAM - 1 x 3ft SCSI Cable - 1 x 6ft Null Modem Cable - 1 x LVD/SE Terminator - GUI RAID Software - User Manual |
<< Available Functions >>
New disk auto spare |
Host independent |
Environment monitor |
Online expansion |
Continuous rebuild |
Online consistency check |
Failed drive auto-rebuild |
Failed drive indicators |
Audible alarm |
Password protection |
Automatic Bad-Sector & Error recovery |
Multiple RAID selection |
Array roaming |
Online RAID level migration |
Online RAID Strip Size Migration |
Array Management Support |
Audible alarm, Pager and Fax, E-mail Notification |
Monitor /GUI Port Support |
Battery Backup Module (option) |
Dual ROM-Map for Controller Availability |
Rear View
