Model

SyneRAID-1600SAA 3U Rack
(Advanced Version)
** Drives Not Included **

SyneRAID-16SSAA
(3U Rack SCSI)

U4WSCSI/320MBs-to-SATA (Dual Channel Clustering) : 3U 19" Rackmount RAID subsystem with Intel IOP80321 64bit RISC processor, 128MB cache memory, 16 x hot-swappable drive caddies, 3x300W (600+1) load-sharing redundant power supplies.
Comes with:
- One RS232 6ft null modem cable
- One 3ft SCSI cables
- One LVD/SE terminator
- User manual.
- GUI RAID Management Software

Options:
- SNMP Trap board via LAN
- Battry Backup for Cache and Controller protection

SyneRAID-16FCSAA
(3U Rack Fibre)
(Copper HSSDC2)

FC/200MBs-to-SATA (SAN Ready): 3U 19" Rackmount RAID subsystem with Intel IOP80321 64bit RISC processor, dual loop Copper HSSDC2 Fibre Channel with 2Gbit/sec per loop, 128MB cache memory, 16 x hot-swappable drive caddies, 3x300W (600+1) load-sharing redundant power supplies.
Comes with:
- One RS232 6ft null modem cable
- User manual.
- GUI RAID Management Software

Options:
- SNMP Trap board via LAN
- Battry Backup for Cache and Controller protection.
- Fiber Cables Sold Separately

SyneRAID-16FOSAA
(3U Rack Fibre)
(Optical LC)

FC/200MBs-to-SATA (SAN Ready): 3U 19" Rackmount RAID subsystem with Intel IOP80321 64bit RISC processor, dual loop Optical LC Fibre Channel with 2Gbit/sec per loop, 128MB cache memory, 16 x hot-swappable drive caddies, 3x300W (600+1) load-sharing redundant power supplies.
Comes with:
- One RS232 6ft null modem cable
- User manual.
- GUI RAID Management Software

Options:
- SNMP Trap board via LAN
- Battry Backup for Cache and Controller protection.
- Fiber Cables Sold Separately

SLD-RAL-1600-3URAK

Expandable Proprietory Sliding Rail for SyneRAID-1600 3U Rack

Model

Recommended SCSI & Fibre Adapter

SyneSCA-U3LP

U3WSCSI/LVD/160MBs Single Channel 64bit-PCI SCSI Adapter w/LSI Symbios 53C1000R High Performance Chipset. Compatible with NT4, Win2000 & 2003, XP, SCO UNIX, UnixWare, Netware 4x, 5x, 6x, OS/2, LINUX (RedHat, SuSe, Caldera, etc..).
Fully tested for Solaris x86

SynSCA-U4LP

64bit-PCI U4WSCSI/LVD/320MBs Single Channel Bus Mastering SCSI Adapter w/LSI Symbios 53C1030 High Performance Chipset. Compatible with NT4, Win2000 & 2003, XP, SCO UNIX, Netware 5.1, 6.0, UnixWare, LINUX (RedHat, SuSe, Caldera, etc..).
Fully tested for Solaris x86 and Solaris SPARC

** Copper **
SyneFCA-2GHC 

** Optical **
SyneFCA-2GLC

64bit PCI 2GB Fibre Channel Low Profile, Copper type ports with HSSDC, HSSDC2, DB9 or Optical LC Connector.   Built-in Qlogic ISP2310 RISC Processor, 400Mbytes/sec Fibre Channel Transfer Rate in full Duplex Mode, FC-AL Private & Public Loop, Point-to-Point, Switched Fabric, FL-Port, F-Port for Fabric Log-in. Concurrent SCSI, IP, Virtual Interface (VI) Protocol and FC Tape Support, Class 2 and 3 Fibre Channel Service, BIOS Support (Local & Fabric). Comes with SANblade GUI Software.
Fully tested for Solaris x86 and Solaris SPARC

High-Performance In tel IOP80321 64-bit RISC microprocessor

2GB/200MBs Fibre Channel or U3WSCSI/160MBs & U4WSCSI/320MBs architecture provides leading-edge data storage speeds

Up to 1GB cache with Tuning Options to match your data trends

Module and Cable-less design enhance system reliability and stability.

Redundant, hot-swappable Intelligent cooling fans ensure system temperature stability

2+1 Redundant, hot-swappable, Load-Sharing power supplies reduce power spikes and surges

Supports Multiple and Global hot spares for complete data protection

Backplane designed for increased reliability and hot-swappability

Intelligent dynamically cooling system for high RPM drives

Proprietary chassis design for enclosure management & status report of all components

Host independent controller-based LUN mapping for multiple server environments

Supports multiple ID, multiple LUN & multiple RAID

Supports a wide variety of SATA disk drive capacities

Scale to Terabyte solutions simply on a single RAID controller

Dynamic on-line RAID expansion for instant storage growth without any system downtime

Specifications

Form Factor :

19" Rackmount 3U Chassis

Host Interface:

Dual U3/U4WSCSI/160MBs/320MBs channels or Dual loop 2Gb/200MBs Fibre channels

System Architecture:

OS independent and host transparent, Intel IOP80321 64-bit RISC microprocessor, cache memory up to 1GB ECC

RAID Level

0,1, (0+1), 3, 5, 30 and 50, multiple RAID ,JBOD

Backplane Design :

Supported 16-bay SATA hot-swap disk drives

Hot-Swap Components :

Hard drives, power supplies, cooling fans

Redundant Components :

Hard drives, power supplies, cooling fans

Enclosure Management & Error Notification:

Temperature failure, fan failure, power failure monitor and report. Audible alarm, status LEDs, remote paging

Battery Backup Module:

Yes (Option)

Number of drive bays:

16

16

Host Type:

Dual U3/U4SCSI/160MBs/320MBs
channels

Dual Loop 2Gb/200MBs Fibre
channels

Drive Type:

Low-profile (1-inch high) SATA disk drive

Drive Capacity:

20GB, 40GB, 60GB, 80GB, 100GB, 120GB, 160GB,200GB,
or 250GB (5,400 and 7,200 RPM)

Maximum Cap/Enclosure:

>4.8 TB (16 x 300GB)

>4.8TB (16 x 300GB)

Power Requirements

Input Voltage:

100 ~ 240 VAC 46 ~ 63Hz

Power Supply Rating:

3 x 300 watt hot-swappable PSUs

Certification Compliance

Emission Requirements:

FCC Class A

Safety Requirements:

UL1950, CSA #950, TUV/EN60950

CE Compliance (EMC):

89/336/EEC EMC Directive

Physical Characteristics- Rackmount

Width:

17.5" ( 445 mm )

Length:

22.87" ( 581 mm )

Height:

5.12" ( 131 mm ) (3U)

Weight:

55.2 lbs .(25Kg) w/o drives

Environment

Ambient Temperature:

Operating: 5°C to 40°C
Non-operating/Storage: - 40°C to 70°C

Relative humidity:

95% @ 30 o C (non-condensing)

Storage Management : Java-based GUI RAID management software (Option)