SyneRAID™-800 SA

SCSI/Fibre-to-SATA RAID Subsystem

Model

SyneRAID-800SA Tower
** Drives Not Included **

SyneRAID-8SCSA
(SCSI-to-SATA)

U3WSCSI/160MBs-to-SATA (Dual Channel Clustering) : 15" Tower RAID subsystem with Intel i80303 64bit RISC processor, 64MB cache memory, 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 null modem cable, one 3ft SCSI cables, one LVD/SE terminator and user manual. (Optional GUI RAID Management Software)

SyneRAID-8FCSA
(Fibre Copper)
(HSSDC2-to-SATA)

FC/200MBs-to-SATA (SAN Ready): 15" Tower RAID subsystem with Intel i80303 64bit RISC processor, dual loop Copper HSSDC2 fibre channel with 2Gbit/sec per loop, 64MB cache, supports 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 cable and user manual (Optional GUI RAID Management Software) . Fiber Cables Sold Separately

SyneRAID-8FOSA
(Fibre Optical)
(Optical LC-to-SATA)

FC/200MBs-to-SATA (SAN Ready): 15" Tower RAID subsystem with Intel i80303 64bit RISC processor, dual loop Optical LC fibre channel with 2Gbit/sec per loop, 64MB cache, supports 8xhot-swappable drive caddies, 2x300W load-sharing redundant power supplies comes with: One RS232 cable and user manual (Optional GUI RAID Management Software) . Fiber Cables Sold Separately

Model

Recommended SCSI & Fibre Adapter

SyneSCA-U3LP

U3WSCSI/LVD/160MBs Single Channel 64bit-PCI SCSI Adapter w/LSI Symbios 53C1000R High Performance Chipset. Compatible with NT4, Win2000 & 2003, XP, SCO UNIX, UnixWare, Netware 4x, 5x, 6x, OS/2, LINUX (RedHat, SuSe, Caldera, etc..).
Fully tested for Solaris x86

** Copper **
SyneFCA-2GHC 

** Optical **
SyneFCA-2GLC

64bit PCI 2GB Fibre Channel Low Profile, Copper Type ports with Copper HSSDC, HSSDC2, DB9 or Optical LC Connector.   Built-in Qlogic ISP2310 RISC Processor, 400Mbytes/sec Fibre Channel Transfer Rate in full Duplex Mode, FC-AL Private & Public Loop, Point-to-Point, Switched Fabric, FL-Port, F-Port for Fabric Log-in. Concurrent SCSI, IP, Virtual Interface (VI) Protocol and FC Tape Support, Class 2 and 3 Fibre Channel Service, BIOS Support (Local & Fabric). Comes with SANblade GUI Software.  Solaris x86 and Solaris SPARC (fully tested)

Performance :

 

2GB F/C or U3WSCSI/160MBs architecture provides leading-edge data storage speeds

 

Up to 512MB cache with Tuning options to match your data trends

 

Module and Cable-less design enhance system reliability and stability.

Availability :

 

Redundant, hot-swappable Intelligent cooling fans ensure system temperature stability

 

1+1 Redundant, hot-swappable, Load-Sharing power supplies reduce power spikes and surges

 

Supports Multiple and Global hot spares for complete data protection

 

Backplane designed for increased reliability and hot-swappability

 

Intelligent dynamically cooling system for high RPM drives

 

Proprietary chassis design for enclosure management & status report of all components

Scalability:

 

Host independent controller-based LUN mapping for multiple server environments

 

Supports multiple ID, multiple LUN & multiple RAID

 

Supports a wide variety of SATA disk drive capacities

 

Scale to Terabyte solutions simply on a single RAID controller

 

Dynamic on-line RAID expansion for instant storage growth without any system downtime

Specifications:

Form Factor :

Desktop tower Type

Host Interface : Dual U3WSCSI/160MBs channels or Dual loop 2Gb/200MBs Fibre channels
System Architecture : OS independent and host transparent, Intel i80303 64-bit RISC microprocessor, cache memory up to 512MB
RAID Level 0,1, (0+1), 3,5, multiple RAID, JBOD
Backplane Design : Supported 8-bay SATA hot-swap disk drives
Hot-Swap Components : Hard drives, power supplies, cooling fans
Redundant Components : Hard drives, power supplies, cooling fans
Enclosure Management & Error Notification : Temperature failure, fan failure, power failure monitor and report. Audible alarm, status LEDs, SNMP traps, network messaging, remote paging
Battery Backup Module: Yes (Option)

Model:

S yneRAID™-800SA-S

S yneRAID™-800SA-F

Number of drives:

8

8

Host Type:

Dual U3WSCSI/160MBs
channels

Dual loop 2Gb/200MBs Fibre
channels

Drive Capacity:

20GB, 40GB, 60GB, 80GB, 100GB, 120GB, 160GB,200GB, 250GB, or 300GB (5,400 and 7,200 RPM)

Maximum Cap/Enclosure:

>2.4TB (8 x 300GB)

Power Requirements:

Input Voltage:

100~240 VAC 46~63Hz

Power Supply Rating:

2 x 300 watt hot-swappable PSUs

Certification Compliance:

Emission Requirements:

FCC Class A

Safety Requirements:

UL1950, CSA #950, TUV/EN60950

CE Compliance (EMC):

89/336/EEC EMC Directive

Physical Characteristics Tower:

Width:

7.7" ( 195 mm )

Length:

12.36" (314mm)

Height:

15.35" ( 390 mm )

Weight:

24.2 lbs .(11Kg) w/o drives

Environment:

Ambient Temperature:

Operating: 5°C to 35°C
Non-operating/Storage: - 40°C to 70°C

Relative humidity:

95% @ 30 o C (non-condensing)

Storage Management : Java-based GUI RAID management software (Option)