| |
 |
|
U3WSCSI/160MBs-to-UDMA/100/133
(Dual Host Channel Clustering): 2U 19" Rackmount
RAID subsystem with Intel IOP321 64bit/400MHZ processor
controller, 128MB ECC DDR Cache memory, 10/100 Ethernet
port, eight hot swappable disk canister, hot swappable load
sharing redundant power supply, 1xNull Modem, and 2x3ft
SCSI cable and 2xLVD/SE Terminator. Includes Remote GUI
RAID Management Software
|
|
U3WSCSI/LVD/160MBs Single
Channel 64bit-PCI SCSI Adapter w/LSI Symbios 53C1000R High
Performance Chipset. Compatible with NT4, Win2000, XP, SCO
UNIX, UnixWare, Sun Solaris OS, LINUX, and others.
|
 |
-
Capacity Over 2TB.
-
OS Independent tested for Windows, Unix, Linux, MAC, Novell,
Solaris.
-
Unique backplane designed no need for extra cable to install
Drives.
-
Excellent ventilation and Anti-Vibration design.
-
Supports RAID level 0, 0+1,1,3,5, RAID
6, JBOD, Multiple RAID and NRAID.
-
On-Line automatic or manual Hot-Spare assignement and rebuild.
-
Hot-Swap capable for fans, power supply modules and Drives.
-
Supports HDD On-line Dynamic Capacity expansion.
-
Supports backup software such as; Veritas, Legato, CA BrightStor.
-
Built-in two XOR engine to support VOD, MOD and specific
application solution.
Self Healing: Unplug a Non-defective Drive & Maintain
Full Fault Tolerance
SyneRAID6™-800IP is aiming to deliver an AI user friendly
equipped to assist experienced specialists solve the HDD failure.
When any two Disks error occurred under RAID6 configuration, the
system will automatically replace the failed HDD. In case of a
system administer accidentally unplugging a non-defective drive
in a degraded RAID set, it still will not do any damage on non-defective
drive.
On-line Raid Set Moveable:
With Array Roaming, it allows the administrators the ability
to move a completely RAID set to another system without losing
RAID configuration and data on that RAID set. If a server fails
to work, the RAID set disk drives can be moved to another server
and inserted in any order.
Smart LED Display ALP(System Active Led Plus):
Unlike regular SCSI Active LED, it has synchronized light indicators
for Cache Memory, Controller and HDD on the front panel giving
precise operationional status to the users. To ensure any data
left in the Cache Memory has been completely written on HDD before
the RAID subsystem be shut down.
Secure Your Business with RFI ( Redundant Flash Image):
SyneRAID6T-800IP brings your business maximum security and without
interuption to business activities. RFI( Redundant Flash Image)
provides a unique redundancy to help and ensure against controller
availability. This reduces the risk of system failure due to firmware
crash.
LED Auto-Scanning:
When the system is on, the LED Auto-Scanning function will force
the subsystem to perform an order check for all its indicators
and identify each drive's address from 1 to 8 in the RAID.
Overload Voltage Protection:
With its four-stage HDD power
on design, the system can protect its power supply from overloading
thus guaranteeing longetivity.
|
| RAID Engine: |
|
Intel IOP321
Processor (64bit/400MHz) |
| Online RAID Levels: |
|
0, 1, 3, 5, 0+1, RAID6
, JBOD, NRAID |
| Multiple RAID Support: |
|
16 Array Workgroup |
| Cache Support Size: |
|
Up to 1GB ECC DDR SDRAM |
| Cache Memory Type: |
|
DIMM 184pin Socket |
| Host Channels: |
|
2 |
| Number of Drive Bays: |
|
8 |
| Host Interface: |
|
Ultra3 / Ultra3 Wide
SCSI |
| Disk Bus Interface: |
|
Ultra ATA 133 |
| PCI IDE Controller: |
|
64bit / 66MHz Bus Mastering |
| Front Panel LED Indicators: |
|
RAID Busy, Power Supply,
Fan, Temperature |
| Environment Detection: |
|
Fan, Temperature, Voltage,
Chassis open |
| Mobile Rack LED Indicators: |
|
Power, Drive Status |
| Firmware Upgrade: |
|
VT-100 & Web Browser
(30 Seconds) |
| Remote TCP/IP Configuration and Management: |
|
Yes(Ethernet Port) |
| Rackmount Size: |
|
88(H) x 483(W) x 486(D)
mm |
| Hot Swap Power Supply Rating: |
|
300W(1+1) or 450W (2+1)
PFC |
| Input Voltage: |
|
AC 90 ~ 260V |
| Operating Temperature: |
|
5¢J to 50¢J |
| Weight: |
|
12kgs |
|
